← All Heating & Cooling Guides
Short answer: Converting from oil to gas usually costs about $7,500 to $9,500 for the new gas heating installation, gas piping and removal of your old oil heater, and the installation takes about two days. A stainless steel chimney liner, when needed, adds roughly $1,700 to $1,900. Your price can run higher depending on your home.
Last updated: November 18, 2026
Call 610-352-6900 Request a free estimate
If your home is still heated with oil, you have probably wondered whether switching to natural gas is worth it. This guide walks through what a conversion involves, what drives the cost, the steps from first call to finished install, and the questions to ask before you commit. Toran Heating & Air Conditioning is a family-owned HVAC company serving Philadelphia, the Main Line, Eastern Montgomery County and Eastern Delaware County, and oil-to-gas conversions are part of our regular work.
Jump to: Is it worth it? | Is gas on your street? | Cost | Step by step | Equipment options | Your oil tank | Warranty & financing | FAQ
Is Converting From Oil to Gas Worth It?
For many homeowners, yes, but it depends on whether gas is available on your street and how old your current system is. Here is how the two fuels compare in practice.
- Running cost: Natural gas is generally less expensive than heating oil for the same amount of heat, though prices change with the market.
- No tank and no deliveries: Gas arrives through a pipe, so there is no tank to fill, monitor or eventually replace, and no running out of fuel in a cold snap.
- Cleaner burning: Gas systems typically need less cleaning and maintenance than oil burners.
- Upfront cost: Conversion costs more at the start than simply replacing like for like, so the savings build over time.
- Availability: If there is no gas main on your street, conversion may not be possible, or the connection may change the math.
Is Natural Gas Available on Your Street?
This is the first question to answer, and it is free to find out. In Philadelphia, natural gas service comes from Philadelphia Gas Works (PGW), and in the suburbs it comes from PECO. Your utility can tell you whether a main runs past your home and whether your house already has a gas service line, for example for a stove or water heater.
If you need a new line, the gas utility brings it to the front of your home. We then run the gas piping from there to your new heater. A home that already has gas service is simpler to convert.
What Does an Oil to Gas Conversion Cost?
Most conversions we do fall in the range below. Your total depends on your home and what is already in place.
| Cost item | What it covers | Typical cost |
|---|---|---|
| New gas heating installation, gas piping and old heater removal | A new gas furnace or boiler installed, gas piping to the heater, and removal of your old oil unit. See our furnace types guide for options. | $7,500 – $9,500 |
| Stainless steel chimney liner (when needed) | Lines the chimney so a standard-efficiency gas unit vents safely. Installed with the new heater. | $1,700 – $1,900 added |
| Oil tank removal | Removing the tank from your basement. | Quoted with your estimate |
These are typical estimates, not a quote, and some homes cost more depending on the chimney, piping and layout. The only way to know your number is a look at your system and your basement. Request a free estimate and we will itemize it. We also offer financing through Synchrony Bank with low interest rates.
The Conversion Process, Step by Step
- Free estimate and home check. We look at your current system, ductwork or radiators, venting and tank location, and recommend options.
- Confirm gas availability. If you need a new line, the gas utility brings it to the front of your home.
- Choose your equipment. A high-efficiency furnace or boiler is common, but the right choice depends on your home.
- Permit. We pull the permit for you.
- Install the new system. This usually takes about two days, including the gas piping and removal of your old oil heater, plus a chimney liner if your system needs one.
- Remove the oil tank. We remove the tank from your basement, and you receive all the paperwork.
- Inspection and gas on. After the work passes inspection, your gas service is turned on.
- Cancel your oil delivery. Once your gas system is running, you can stop oil deliveries.
Want to talk through the timeline for your home? Book a free in-home estimate or call 610-352-6900.
Your Equipment Options
Replace the whole system
For most homes, especially those with older oil equipment, a new gas furnace or boiler is the better choice. You get a system designed for gas, modern efficiency and a fresh warranty. If you have radiators, you would get a gas boiler, not a furnace. See our gas heating equipment page for furnaces and boilers.
Convert the existing burner
A gas burner can sometimes be installed into your existing oil heater instead of replacing it. We usually only do this on oil heaters less than 10 years old. Older units are better replaced.
Chimney and venting
A standard-efficiency gas unit vents through the chimney, which needs a stainless steel liner for gas. A high-efficiency condensing unit vents through PVC and does not use the chimney, which can be easier in an older home or rowhome.
What Happens to Your Oil Tank?
Once you switch, the old tank no longer serves a purpose and should be handled properly. We remove the oil tank from your basement as part of the project, and you receive all the paperwork for your records. A tank left behind can cause problems when you sell.
Warranty and Financing
- Heat exchanger: 20-year limited warranty.
- Parts and controls: 10-year manufacturer warranty.
- Labor and materials: 2-year warranty from Toran Heating & Air Conditioning.
- Financing: Available through Synchrony Bank with low interest rates.
Rebates and Incentives
Utilities and manufacturers sometimes offer rebates for switching fuels or installing high-efficiency equipment, and programs change often. Ask us what is currently available when we quote your project, and check with your gas utility directly.
Oil to Gas Conversion: Frequently Asked Questions
How long does an oil to gas conversion take?
The installation usually takes about two days, including the gas piping and removal of your old heater.
How much does it cost?
Most conversions run about $7,500 to $9,500 for the new gas heating installation, piping and removal of the old oil heater. A stainless steel chimney liner adds about $1,700 to $1,900 when needed, and some homes cost more.
Will I save money?
Most homeowners see lower fuel costs, but your savings depend on current prices, your home and your equipment. A high-efficiency gas system usually widens the gap.
Do you pull the permit?
Yes. We pull the permit for you.
Can I convert if I have radiators?
Yes. A gas boiler can feed your existing radiators, so you keep your heat distribution and change the fuel and boiler.
Can you also switch my water heater to gas?
Yes. We install gas water heaters, so you can move your hot water to gas at the same time.
Do you offer financing?
Yes. Financing is available through Synchrony Bank with low interest rates.
Is oil to gas conversion available in my town?
Availability depends on whether a gas main runs on your street. We serve Philadelphia, the Main Line, Eastern Montgomery County and Eastern Delaware County and can check your address when we visit.
Oil to Gas Conversions Near You
We install, repair and replace heating systems across Philadelphia, the Main Line, Eastern Montgomery County and Eastern Delaware County, including Bala Cynwyd, Narberth, Merion, Wynnewood, Ardmore, Havertown, Upper Darby, Drexel Hill, Chestnut Hill and neighborhoods throughout Philadelphia.
Get a Free Oil to Gas Conversion Estimate
Not sure whether conversion makes sense for your home? Our team will look at your system, check what is possible and give you clear pricing with no pressure. See what homeowners say on our reviews and testimonials page.

